Send Message
Chongqing Gold Mechanical & Electrical Equipment Co.,Ltd
Email: master@hy-industry.com TEL: 86-23-6279-4421
Home > PRODUCTS > Pile Integrity Test >
CSL Cross Hole Ultrasonic Monitor Non Destructive Testing Method
  • CSL Cross Hole Ultrasonic Monitor Non Destructive Testing Method
  • CSL Cross Hole Ultrasonic Monitor Non Destructive Testing Method

CSL Cross Hole Ultrasonic Monitor Non Destructive Testing Method

Place of Origin Chongqing, China
Brand Name Gold
Model Number ZBL-U5600
Product Details
Product Name:
Cross Hole Ultrasonic Monitor
Sound Time Range:
±1677.7ms
Mode Of Operation:
Touch Screen
Display Screen:
10.4 Inch Bright LCD Screen
Sound Time Accuracy:
0.05μs
Emission Voltage:
65,250,500,1000 V Four Gear Adjustable
Length:
512~4096
Sampling Period:
0.05 μ S~1638.4 μ S Multifile Optional
High Light: 

CSL Cross Hole Ultrasonic Monitor

,

Cross Hole Ultrasonic Monitor

Product Description

Cross Hole Ultrasonic Monitor Pile integrity Testing

 

 

Cross Hole Ultrasonic Monitor is a non-destructive testing method that involves transmitting ultrasonic waves through a pair of parallel tubes or probes embedded in the concrete. One probe acts as a transmitter, while the other acts as a receiver. As the ultrasonic waves travel through the concrete, they are reflected back to the receiver by any discontinuities or changes in the concrete's properties, such as cracks, voids, or changes in density.

 

By analyzing the time and amplitude of the reflected waves, engineers can determine the location, size, and severity of any anomalies within the concrete. This information can then be used to evaluate the quality of the concrete and identify any potential defects or weaknesses before they become a problem.

 

CSL testing is typically performed after the concrete has cured for several days or weeks to allow it to reach its full strength. The test can be conducted at various depths within the concrete, depending on the size and length of the foundation element being tested.

 

Application:

 

In addition to assessing the quality of newly placed concrete, cross hole ultrasonic monitor testing can also be used to evaluate the condition of existing structures, such as bridges, dams, and tunnels. It is a valuable tool for assessing the integrity of concrete structures and ensuring their long-term durability and safety.

 

Technical Specification

 

product name Multi-channel ultrasonic pile measuring instrument
product model   ZBL-U5700
main engine number of channels   4
Number of test profiles at one time   6
Storage method Built-in electronic hard disk (4GB) + large capacity U disk
Sound time range ±1677.7ms
Emission voltage 65,250,500,1000 V four gear adjustable
Amplification gain 82dB
dynamic range 154 dB
Gain accuracy 0.5dB
Band width (12dB) 2~500kHz
receiving sensitivity ≤10μV
intertrack crosstall ≤1/400
communication interface USB,MiniUsb,WiFi,Bluetooth
test mode Flat test, double test, encryption, oblique test power
supply mode built-in Lithium batteries or a mobile power supply
outlay 220V AC/DC
operate time (h) > 8
work environment temperature -10℃~+40℃
humidity < 90%RH
Size of host 270mm×220mm×75mm
Weight of host 2.5kg
Connection mode of the lifting device

Wired, wireless switchable

Wireless lift device Maximum transmission distance ≥5m
resolution ratio 1cm
operate time ≥20h
power supply mode Built-in lithium battery
Record spacing From 2 cm to 25 cm is optional
hoisting speed

> 60m / min (5 measuring points per meter)

 

Product Image

 

CSL Cross Hole Ultrasonic Monitor Non Destructive Testing Method 0CSL Cross Hole Ultrasonic Monitor Non Destructive Testing Method 1CSL Cross Hole Ultrasonic Monitor Non Destructive Testing Method 2CSL Cross Hole Ultrasonic Monitor Non Destructive Testing Method 3

Send your inquiry directly to us