Rectification Power Large Power Intelligent Underground Geological Exploration Equipment

Rectification power large power intelligent underground geological exploration equipment

Overview

The new generation DC IP transmitter system is composed of WDZ-5A rectification power (contained balanced load controller) and WDFZ-5 large power intelligent transmitter. This system breaks through the conventional design mode; uses chip microcomputer for controlling, and is driven by intelligent IGBT. It has high measurement accuracy, multi-functions and high dependability. It is small and light, and can be carried conveniently. It also has the perfect function of the over-voltage, over-current, open circuit protection and personal safety protection and so on...

System configuration

1.transmitter

2.receiver

3.cable

4.electrode

5.balance load

6.voltage source rectifier

The WDJS-3 series multi-channel digital DC IP receiver uses a short-wire working mode. It can be powered by a WDFZ-5T or WDFZ-10T high-power intelligent transmitter. Multiple receivers can receive at the same time, and the receiver is equipped with multiple channels that can be measured simultaneously, which doubles the working efficiency. The instrument can directly measure and store self-potential, primary field potential, and apparent polarizability in 4 different time periods. It can also measure and store secondary field attenuation curves, providing absolute flexibility for later data analysis and processing. It is widely used in metal and non-metal mineral resource exploration, groundwater search, and engineering geology.

****Transmitting power: 7.2kW (WDFZ-5T); 10kW (WDFZ-10T); 15kW (WDFZ-15T); 20kW (WDFZ-20T)

****Transmitting voltage: ±1200V

****Transmitting current: ±6A (WDFZ-5T); ±10A (WDFZ-10T); ±15A (WDFZ-15T); ±20A (WDFZ-20T)

Current measurement accuracy: ±0.2% ±1 word

Power supply (transmitting) cycle: 4S~256S

Current storage time interval: 1~30 minutes

Large-capacity data storage: Can store no less than 1,000,000 sets of current data, with power-off protection function

Communication interface: USB interface

Instrument working power: lithium battery
DC high voltage input: 1200VDC (maximum input voltage), 6ADC (maximum current)

Operating temperature: -10℃～50℃

Storage temperature: -20℃～60℃

Volume: 406 mm×330 mm×174 mm

Weight: 7.8 kg

Multiple transmission channels, comprehensive understanding of the spatial distribution of the ore body - by selecting the PDGK-1 multi-channel electrode controller and PDGZ-1 multi-channel electrode converter, multiple power supply electrodes can be connected at the same time, and any pair of electrodes can be selected for power supply during operation.

Support multiple synchronization modes - The instrument supports software synchronization, quartz clock synchronization and GPS synchronization (optional). It can be used with ordinary digital DC IP receivers to form a traditional IP measurement system (only using software synchronization), and can also be used with our newly designed WDJS-3 series multi-channel digital DC IP receivers to form an efficient, multi-channel, high-performance IP measurement system that supports multiple synchronization modes.

Certificates

Packing and delivery

contact information