![]() |
Place of Origin | Chongqing, China |
Brand Name | Gold |
Model Number | GD-S |
High Accuracy Borehole Water Level Meter Steel Ruler Tape
Application for borehole water level meter
1. Long-lasting performance for well drillers, pump installers, and other service users
2. Groundwater level observation in water conservancy and hydro-power engineering
3. Water level monitoring for pile foundation
4. Water level long -term safety monitoring
How to use borehole water level meter?
First let winding reel freely, remove the level probe, press the power button (water level file, the power indicator light), put probe head in the water pipe, hold the steel ruler tape cabel, let the level probe slowly downward. Try not to let the cable touch the tube wall (the purpose is to extend the service life).
When the touches of level probe are exposed to the water surface, the audio of the receiving system will emit continuous bee sounds. At this time, write down the depth size of the steel ruler cable at pipe head, which is the distance from the groundwater level to the mouth of the pipe mouth.
Essence If the bee sounds in a relatively large noise environment, you can use the peak indicator. Just dial the selection switch on the instrument panel to the voltage gear. The measurement method is the same as above. At this time The measured accuracy is the same.
After survey, clean up the water or stains at the probe and the steel ruler tape cable, tailor the steel ruler tape around the line disk, insert the probe into a fixed slot, and tighten the fixed screw.
Technical Specification
Shell Material | ABS, Metallica |
Shell Color | Yellow |
Depth Range | 0-300M |
Response Time | ≤1ms |
Adaption Range | 100μw-1000μw |
Battery Power | 9V Lithium Battery |
Measurement Signal | Light and Buzzer |
Accuracy | 0.5mm |
Working Temperature | -20℃-60℃ |
Standard | IEC60332-1 |
Product Image